CV-TYQ_1213_E_20180322
※
Turns off
Beep
Turns off
Turns on
Turns on
You cannot activate Quick
Temp mode while the
product is set at 98°C
Keep Warm mode or
Vacuum Insulation Keep
Warm mode.
Beep
Turns on
Beep
※
You will hear 2 beeps
when 6H is selected.
Beep
13
12
●
Water does not reach a boil under Quick Temp mode, and
should not be used to prepare baby formula.
●
Although the water will not reach a boil when Quick
Temp mode is activated, the Steam Vent will become
hot. Please do not touch it.
※
After reaching the
selected temperature,
it will automatically
switch to Keep Warm.
(The QUICK TEMP light
turns off and the KEEP
WARM light turns on.)
●
You cannot select 98°C Keep Warm mode or Vacuum
Insulation Keep Warm mode while Quick Temp mode is
activated.
●
There may be a lingering chlorine smell if tap water is used while
Quick Temp mode is activated. If this is an issue, use the regular
Boil mode instead.
●
Depending on the amount of water and room temperature the
actual water temperature after heating may differ from that
shown on the Display.
●
Depending on the amount of water, room temperature, and
atmospheric pressure, some steam may be produced.
●
The Quick Temp mode may be canceled if the Power Cord is
detached. Set to the desired mode again.
●
The product begins the Regular Boil mode when water is added.
Activate the Quick Temp mode again.
Each press of the Energy-Save/Timer button changes the mode and set time.
When operation is not confirmed for approx. 2 seconds, the displayed settings is activated.
A melody sounds and the Energy-Saving
Timer function is activated.
The Boiling function will complete at the set time.
●
When using the Energy-Saving Timer function with the
Quick Temp mode, set the Quick Temp mode after
selecting the Energy-Saving Timer function
Boiling may stop earlier than set, depending on room
temperature, water temperature and amount of water.
The BOIL light turns off and the KEEP WARM light turns on.
How to cancel
Energy-Saving Timer
function
Or
Press the button once.
●
It is unable to use the Energy-Saving
mode with Energy-Saving Timer function.
While the water is heating, press the
button to select the Quick Temp mode.
※
At the 70°C Keep Warm mode only, water is heated once to approx. 80°C and
then kept warm at approx. 70°C. The length of time for the water temperature to
reach approx. 70°C. 1 hour after boiling. (At a room temperature of 23°C with
the Inner Container filled to the Maximum Water Level Line.)
This function heats the water to the Keep Warm temperature
setting without reaching a boil. The water will reach the Keep
Warm temperature setting quicker.
As compared to the regular Boil mode, the function shortens the
boiling time, suppresses steam generation, and helps save
energy.
The Quick Temp mode is unable to boil and dechlorinate water.
Set this mode for potable water.
Each press of the REBOIL/QUICK TEMP button changes the boil mode.
Regular Boil mode
Quick Temp mode
(Default)
NOTE
In the case of 98°C Keep Warm mode, 90°C Keep Warm mode,
and 80°C Keep Warm mode
6H 7H 8H 9H 10H
Cancel (temperature display)
Energy-Saving
mode
Energy-Saving
mode
Energy-Saving Timer function
Energy-Saving Timer function
6H 7H 8H 9H 10H
Energy-Saving Timer function
Energy-Saving Timer function
Cancel (temperature display)
In the case of 70°C Keep Warm mode and
Vacuum Insulation Keep Warm mode
You cannot select the
Energy-Saving mode
while 70°C Keep Warm
mode or Vacuum
Insulation Keep Warm
mode is activated.
Press the button, and set
either Energy-Saving mode or
Energy-Saving Timer function
(6 hours to 10 hours)
.
When the Energy-Saving mode is fixed,
the temperature display turns on.
Energy-Saving
Mode
For approx. 2 seconds after selecting the Energy-Saving
mode, the temperature display turns off.
The following cases, too, cancel the Energy-Saving mode.
●
Water may not be dispensed smoothly for a while
after heating to the Keep-Warm temperature
setting. The temperature shown on the Display
after heating may differ from the Keep-Warm
temperature setting.
●
The product automatically begins heating the
water by adding water. If the water level is still not
high enough, it will not automatically switch to Boil.
In this case, cancel the Energy-Saving mode, then
press the REBOIL /QUICK TEMP button.
●
When 70°C Keep Warm mode or Vacuum
Insulation Keep Warm mode is chosen in the
Energy-Saving mode.
How to cancel
the Energy-Saving
mode
Further,
Press the button
once.
Press the button.
Energy-Saving while waiting
When water is heated to the original
temperature setting
Energy-Saving starts.
After automatically shutting off electricity to the heater,
water is kept warm at approx. 70°C.
●
When the water temperature is lower than the
temperature setting, the BOIL light turns on and water is
heated to the temperature setting. After completing
boiling, the hot water may become higher than the
temperature setting.
●
When the water temperature is higher than the
temperature setting, water is not boiled when the
REBOIL /QUICK TEMP button is pressed.
●
The REBOIL /QUICK TEMP button is rejected in Energy-Saving
standby mode.
The setting returns to the Energy-Saving standby mode.
After water is heated to the temperature setting, the
setting returns to the Energy-Saving standby state.
Energy-Saving
standby mode
When operation is not confirmed for approx. 2 hours,
the Energy-Saving mode helps save energy by
automatically shutting off electricity to the heater and
keeping water warm at approx. 70°C.
The Boiling function will complete after the set time.
(The Energy-Saving Timer function helps save energy by
shutting off electricity to the heater until boiling begins.)
When operation is not confirmed
for continuously approx. 2 hours
When the
Energy-Saving Timer
function is re-selected
Press the button
several times to set the
timer to the desired time.
（6H〜10H）
Energy-Saving Timer
Function
Press the button
several times.
If the Power Cord is detached, the Energy-Save
Mode/Energy-Save Timer function will be cancelled and
must be reset.
If the Power Cord is detached:
QUICK TEMP MODE
ENERGY-SAVING MODE / ENERGY-SAVING TIMER FUNCTION
At the 70℃ Keep Warm mode, after the KEEP WARM light blinks,
two short beeps will sound and the KEEP WARM light will turn on.
