
CV-TYQ_0809_E_20180329
8
9
Short beep
Turns on
Beep
Turns on
Turns off
Turns on
Turns on
Short beep ×
10 times
Beeps will
sound, 3 lights
will turn on and
"HH" will appear
on the Display.
●
Be careful not to repeat
the boiling process
without filling the pot
with water, as the
Non-Stick Coating may
discolor and peel off.
The UNLOCK light turns on
and hot water can be
dispensed.
●
Do not unlock and press the
DISPENSE button if the Inner
Container is empty.
NOTE
2
Press the button to dispense hot water.
Do not swivel the product while dispensing water.
●
Initially upon boiling or if it has been a while after dispensing, the
water may not be very hot. Please discard the first cup (of the hot
water).
●
Do not attempt to dispense hot water while boiling.
●
Water may not dispense smoothly for a short period of time after
boiling.
●
Be careful as the Body heats up during the Boil and Keep Warm
modes.
1
Press the button.
DISPOSE WATER
Dispose leftover water when the product is not in use.
DISPENSE HOT WATER
A safety function to prevent hot water
from dispensing if the DISPENSE
button is accidentally pressed.
Automatic Dispense Lock
10 seconds after dispensing,
the UNLOCK light turns off
and the Automatic Dispense
Lock is activated.
Do not tilt or shake the
product after dispensing.
Hot water may drip from the
Spout, causing scalds.
●
Even if no water is dispensed, the
Automatic Dispense Lock will be
activated after about 10 seconds.
1
Unplug the Power Cord
and detach the Upper Lid.
●
Take precaution with the steam.
You may scald yourself.
When detaching the Upper Lid:
1
2
Spout
2
Hold the Handle securely.
Hold the product with both hands and dispose water where indicated
"EMPTY FROM HERE" on the wall of the Inner Container.
●
Take precaution with the
hot water and steam.
You may scald yourself.
●
Take precaution as hot
water may drip from the
Spout, causing scalds.
When disposing hot water:
Water Removal Area
●
Do not plug or unplug the
Power Plug or Appliance
Plug with wet hands. (Doing
so may cause short circuit
or electric shock.)
●
Do not dispose hot water
with the Upper Lid in place.
(The Upper Lid may come
off, spilling hot water and
causing scalds.)
●
Do not allow water to splash
on the Control Panel, Hinge,
Handle or Receptacle.
(Could cause scalding or
breakdown.)
●
Take precaution as not
attaching the Filter properly
may cause it to fall out
when dispensing hot water.
●
Dispose the water at least
once a day. (Leaving water
in the Inner Container can
cause unwanted odor or
scale build-up.)
NOTE
●
Make sure the water level is above the REFILL Line
before pressing the REBOIL/QUICK TEMP button.
Approx.
3
〜
4 minutes
Approx.
5
〜
8 minutes
98
。
C Keep Warm Mode
90
。
C Keep Warm Mode
The BOIL light turns on when
the boiling process begins.
(At a room temperature of 23
。
C
with the Inner Container filled to
the Maximum Water Level Line.)
Time required to
finish reboiling
Reboil mode
Press the button.
This function is used when reboiling
water in the Keep Warm mode.
When the Reboil process is completed,
a melody sounds and the product
switches to Keep Warm mode.
NOTE
●
Pressing the REBOIL/QUICK TEMP button twice activates the
Quick Temp mode. (see pg.12)
●
Do not attempt to dispense hot water while reboiling.
●
Water may not dispense smoothly for a short period of time
after reboiling.
●
When the Energy-Saving mode is selected, you cannot
activate the Reboil mode. To start the Reboil mode, cancel the
Energy-Saving mode once, then press the REBOIL/QUICK
TEMP button. (see P.12)
Automatic Shut-Off function
Unplug the product. Allow the Inner Container
to cool. Fill the Inner Container with water and
plug back in.
●
When plugged in without filling the Inner Container with water.
●
When the water level is lower than the REFILL Line and boiling
has been attempted.
●
When the Inner Container is empty or the Upper Lid is left open for
adding water.
●
When pouring in hot water immediately after plugging in the unit.
The Automatic Shut-Off function activates to shut down power to the
heater in order to prevent damage from overheating. The Display will
show "HH" and beeps will sound to alert you that the Automatic Shut-Off
has been activated. The following conditions may cause activation:
Remedy