Template machine - Touch screen E2
Appendix 1
90
M-123
USB disk not exist
Please insert USB disk containing mps files
M-124
No video file video.avi
Please save the video.avi file into the update category of
the U disk and then update the video file
M-125
Replace the bottom line
The set value of changing the bottom line has reached,
please change the bottom line.
M-126
Determine
clearance
baseline
count
value?
Yes: Enter; No: X
M-127
Not enough bobbin thread
Please replace bobbin thread and press Enter to restart
counting
M-128
Template pattern does not exist
Please exit, press the origin key and change the pattern
M-129
The pattern name file does not match the
pattern
Press ok and reload. The more patterns, the longer it
takes
M-130
Upgrade file length error
M-131
Update master to erase validation errors
M-132
Update master write check error
M-133
Update master to end validation error
M-134
Whether to save as new pattern
Ok key to perform operation, cancel key to exit operation
When saved as a new pattern, the original pattern will
not change.
M-135
Network connection failed
M-136
Successful attendance check
M-137
Unsuccessful attendance check
M-138
Confirm the modification of the network
function, please turn off the power and
restart
The network function will be loaded after system restart
M-139
Oil box filling reminder
Please check the amount of oil in the oil container and fill
it with appropriate oil
M-140
Grease maintenance reminder
Please check each maintenance part and add appropriate
grease (please refer to the maintenance manual for
specific operation).
M-141
Upgrade step end check error
M-142
Correction reference point does not fall
on the corresponding position on the
pattern. Continued operation will cause
the pattern to scale. Whether to continue
operation
Press Enter to perform or Cancel to quit the opreration
M-143
The seam starting point exceeds the safe
position. The seam starting point cannot
be modified
M-144
The needle position in sewing is out of
line with the pattern
