Appendix 1
Template machine - Touch screen E2
83
8 Appendix 1
8.1 List of alarm information
Number
Fault Name
Solution
E001
The pedal is not in the correct position Please adjust the pedal position
E002
Machine is in emergency stop
Please check the status of emergency stop
switch
E003
Confirm nose down
Self recovery error
E004
The main voltage
300V
¥
is too low
Please turn off the power and check the
system hardware
E005
The main voltage (300V) is too high
Self recovery error
E007
Voltage of assistant device (24V) is too
high
Please turn off the power and check the
system hardware
E008
Auxiliary equipment voltage (24V) is
too high
Please turn off the power and check the
system hardware
E009
Auxiliary equipment voltage (24V) is
too low
Please turn off the power and check the
system hardware
E010
Air valve short circuit or fan block
Please turn off the power and check the
system hardware
E011
X motor overspeed fault
Please turn off the power and check the
system hardware
E012
X motor out-of-tolerance fault
Please turn off the power and check the
system hardware
E013
Thread breakage detection error
Please turn off the power and check the
system hardware
E014
Emergency switch is not at the right
position
Please turn off the power and check the
system hardware
E015
X origin detection abnormal
Please press ok to remove the fault
E016
Abnormal position on pin rod
Please press ok to remove the fault
E017
Broken line detection error
Please press ok to remove the fault
E018
The position of the line cutter is
abnormal
Please turn off the power
E019
Emergency stop switch not in normal
position
Please check the emergency stop switch
E020
Step software version error
Please turn off the power
E023
Catch line position abnormal
Please turn off the power
E024
Incorrect connection between
Please turn off the power