![background image](http://html.mh-extra.com/html/zoje/wr580/wr580_product-manual_936864054.webp)
Error solution
•
Trouble shooting procedure
1) Check the angle of motor whether in right position; Check the supervisory interface of operation
panel DJ
【
check the angle whether the angle is in the range 252
±
5
】【
Too big angle will cause
over current and over speed when motor accelerate and sudden stop
】
2 ) Check the grating plate on motor whether it is loose and check whether there is friction between
grating plate and sensor.
3 ) To check the encoder whether it is into dust
4
)
Cable pin of motor power plug 1X4 loose cause mistake of 3 phases.
【
The involved repairing pictures reminded before
】
E17
----Motor reversion
(
The speed of reversion 100ms >750rpm higher than alarm value
)
Summary of Contents for WR580
