![background image](http://html.mh-extra.com/html/zoje/wr580/wr580_product-manual_936864044.webp)
Error solution
Step of solution
1.
If the motor angle correct;Check the operating box monitoring interface DJ
[
Observe if
the motor angle
is in
the range of 252 ± 5
] (if the deviation of motor angle is too big, then
motor acceleration or will cause large current or
speed uncontrolled phenomena)
2.
Judging whether the motor is working or not: using a multimeter (Ω block) to measure
motor socket pin 4 and pin1, 2, 3 whether there is short-circuit, or whether the
impedance
among
motor three-phase U [
2
], V [2], W [1]
is
same issue
.
E9
---
Motor overspeed
error(exceed the designed max speed)
Interface
dj
Summary of Contents for WR580
