ZOJE 5780BK, Operation Manual

Page: 18 / 60

（
6
）梭壳的安装方法
/Installation of bobbin case.
★注意：为了防止突然启动造成人身事故，请关掉电源，确认马达停止转动后再进行。
★
WARNING: To protect against possible personal injury due to abrupt start of the
machine, be sure to start the following work after
1)
L
ift up and hold bobbin case latch lever between two fingers.
2) Push the bobbin case into the hook so that it is supported by the hook shaft and
then snap in the latch lever. Press the bobbin case until the predetermined position is
reached, and it will click.
1
） 扳起梭壳抓手。
2 ） 插入旋梭轴 ，关闭抓
手。梭壳被按到一定位
置会听到喀喳的声音。
► CAUTION
：
If the bobbin case is out of the predetermined position, it can jump out
from the hook to cause the needle thread to tangle on the hook shaft.
Check to be sure that the bobbin case is properly installed in the correct
position.
►
注意：如果梭壳没有在规定的位置，缝纫后梭心会飞出来，上线绕到旋梭轴上。
17