10
© 2020. All rights reserved.
4
Click WiFi
Scan button
The controller will not connect to routers
with ‘WEP’ or ‘OPEN’ security.
Available
WiFi will
show here.
Choose the
one you
want.
4. Once the controller LED is solid, log in to your account (or
create one) at zcontrolcloud.com. Choose the Add New
Device button next to the location you want the controller
(see Figure D). Follow the directions to add your controller
by either auto-detect or entering the Device I.D. When
successful, a Basement Sentry product tile will appear in your
account.
Connecting with your mobile device or computer (Continued)
Controller Set-Up
Your Basement Sentry controller is now online. Be sure you
have added the contact information for phone numbers and
email addresses that should receive notification. This can
done by selecting “Manage Contacts” from the main menu
(the square with 3 lines in the upper right corner). You can
also edit how each device sends out notifications from the
devices
“Alarm Settings” tab. You can now open the product’s
configuration by clicking the “View” button to modify the
controller device and notification settings. You can also
install the Z Control
®
mobile app on your mobile device
(Android and iOS versions available, search
“Z Control
®
” in the app stores).
Firmware Updates
The Basement Sentry controller is capable of OTA, or over-
the-air firmware updates. It’s possible that the controller
could perform an update immediately if one is available
at the Z Control
®
Cloud. If an update is taking place, the
Z Control
®
LED will flicker for up to one minute while the
update is downloaded. The Z Control
®
LED will be solid
and all other LEDs will turn off while the update is being
installed. After up to one minute, the controller will restart
and return to normal operation. The controller’s alert
history on the Z Control
®
Cloud will also be updated with
the firmware upgrade information, and notification to email
accounts will occur.
CONNECTING THE STBS700 PUMP TO THE CONTROLLER
(CONTINUED)