5
© 2021. All rights reserved.
INSTALLATION INSTRUCTIONS
NOTE:
Install the battery backup system when the
primary pump is not needed. Read instructions and
prepare all supplies before beginning installation.
1.
Disconnect power to primary sump and remove
from sump basin.
115 V
GFCI outlet
1
2.
NOTE: Before gluing any fittings, dry fit all connections
to verify proper fit.
Measure the distance from the flex coupling to the
existing discharge piping and cut 1-1/2-in Sched 40
PVC to this size. Install 1-1/2-in flex coupling or 1-1/2-
in union between pipe connected to the pump and the
discharge piping.
Glue all pipe and fittings once fit is verified.
Measure
distance
2
3. Use the included anchors to install the
controller. For best cooling, attach to wall. The
controller must be installed at least 3 ft. above
the sump pit.
AC
POWER
FLOAT
STATUS
BATTERY
DC
PUMP
SILENCE
TEST
24/7 BASEMENT
PROTECTION
USB
RESET
FLOAT
DC
PUMP
FUSE
30 AMP
by
1-800-584-8089
BasementSentry.com
DC POWER
+ 15V DC 1.6A
Controller
Anchors
Minimum
3 ft.
Sump
Basin
3