7
❷ General use
2.1 I Immersing the cleaner
•
Roll out the full length of the cable alongside the pool to avoid the cable becoming tangled during immersion (see
figure )
.
•
Position yourself halfway along the length of the pool before immersing the cleaner (see figure ). This will optimise
the cleaner's movements and reduce tangling in the cable.
•
Place the cleaner vertically into the water (see figure ).
•
Move it slightly in all directions so that the air contained in the cleaner escapes (see figure ).
•
Unroll enough cable into the pool to allow the cleaner to move in the whole pool
.
Lay the rest by the pool side (see
figure ).
Recommended entry point
not
recommended
EN
Summary of Contents for VOYAGER RE 4100
Page 2: ......
