H03818-00.A3 EN – 2012-03
4
•
Secure the
control unit hook using two bolts
a
nd two nuts and tighten with Torx wrench
(7).
•
Place two caps on the wheels
(8).
•
Attach the support blocks to the caddy using four
screws
(V3 = figure 9; V3 4WD = figure 10).
•
The transport caddy is now ready to use
1.4 Connecting the control unit to the caddy
•
Position the control unit over the control unit hook
on the caddy.
•
Slide the locking plate clips into the control hook
and line up the screw holes
(1).
•
Secure the locking plate using Phillips head screws. Do not overtighten
(2).
EN