background image

 

 

H03818-00.A3 EN – 2012-03

 

 

11 

 

Zodiac chlorinators are designed and tested in accordance with International Standard EN 61000

-6-

1 immunity measurements. They a

re 

designed to tolerate minor fluctuations (2000 volts) in power supply that can be reasonably expected to occur in the energy grid. They will 
not tolerate power surges outside these limits nor will they withstand lightning strikes.

 

 

4. Without limiting 3 above, products sold by Zodiac Australia are designed for use with swimming pool water balanced in accordance

 

with 

Australian Standard AS3633

-

1989 with a pH range of 7.0 

7.8.

 

Maximum chlorine readings should not exceed 4ppm. Where pool water is not maintained within these parameters, Zodiac Australia will 
not be responsible under this express warranty for any resulting damage, including damage caused by corrosion, scaling or stress loading.

 

 

5. Replacement parts supplied under this express

 

warranty are warranted to be free from defects in materials and workmanship for the 

remainder of the warranty period or for 12 months from the supply of the replacement, whichever is longer.

 

 

6. Warranty claims relating to replacement of the electrodes for LM series, C series, Duo Clear and D series chlorinators are subject to the 
following pro

-

rata pricing procedure. The Purchaser must pay for the replacement electrode a proportion of the cost equal to that 

proportion of the warranty period during which the original electrode functioned effectively. The warranty period for the replacement 
electrode is the remainder of the warranty period for the original electrode or 12 months from the supply of the replacement,

 

whichever is 

longer. The Purchaser must pay full cost for any replacement electrodes after the first replacement.

 

 

Product warranty registration 

 

7. Purchasers should register their Products as soon as conveniently possible after purchase by completing a

 

Product Warranty Registration 

Form and posting it to Zodiac Australia at the address shown on the Form or by registering online at www.zodiac.com.au.

 

 

8. Product registration must occur, and proof of purchase must be received by Zodiac Australia, prior to any warranty work being 
approved. Where applicable, a serial number, installation date and name of installer is required as part of the registration process.

 

 

How to make a warranty claim 

 

9. The Purchaser must telephone or email Zodiac Australia Customer Service and obtain a warranty ID number for the warranty claim.

 

 

Contact details are:

 

 

Zodiac Group Australia Pty Ltd  

Customer Service 

219 Woodpark Road 

 

Telephone: 1800 688 552

 

Smithfield NSW 2164 

 

Email address: [email protected]

 

 

10. Zodiac Australia reserves the right to determine, in relation to each warranty claim, whether the Product should be returned to the 
Authorised Dealer at the address where the Purchaser purchased the Product or whether warranty service will be provided in the field, 
repaired at a Zodiac workshop or at the premises of an authorized Zodiac warranty agent.

 

 

11. If it is necessary for the Purchaser to incur freight charges in making a valid claim under this warranty, Zodiac Australia will reimburse 
the Purchaser for charges reasonably incurred upon proof of the

 

charges.

 

 

Additional guarantees, rights and remedies  

 

Australian Purchasers - Guarantees under the Australian Consumer Law 

 

12. The benefits of this express warranty are in addition to other guarantees, rights and remedies Australian consumers have under

 the 

Australian Consumer Law.

 

 

13. Zodiac Australia products come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitle

d to a 

replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled 
to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a maj

or failure. 

 

Purchasers in other Countries 

 

14. The laws and regulations of other countries may confer on Purchasers in those countries additional rights and remedies. To the extent 

that 

they cannot be excluded or modified, Purchasers have the benefits of those rights and remedies in addition to the benefi

ts of this 

express warranty. To the

 

full extent that it is permissible to do so, those additional rights and remedies are excluded or modifi

ed so as to 

be consistent with Zodiac Australia's express warranty.

 

 

INCONSISTENCY WITH WARRANTY STATEMENTS IN PRODUCT MANUALS OR OTHER DOCUMENTS ACCOMPANYING PRODUCTS 

If any warranty statements in a Zodiac Australia product manual or other document are inconsistent with the above Express Warranty and 
Guarantees, the above overrides and replaces the inconsistent statements.

 

 

8. Conformity 

 

 
 
 
 

 

The manufacturer reserves the right to modify these specifications without notice. 

 

Although the cleaning robots have been tested in a large variety of Swimming pools, Zodiac cannot be held responsible in the case of a non 
perfect adaptation of the robot to a particular swimming pool.

 

Summary of Contents for V3

















Reviews: