3.
Grasp the handle and lift up to remove the filter
canister (Figure 8).
Figure 8. Remove the Filter Canister
4.
Press the interior latch and remove the filter
canister lid. See Figure 9.
Figure 9. Remove Filter Canister Lid
5.
Using a hose with clean water, rinse the filter
canister and lid to remove all debris (Figure 10).
Figure 10. Rinse the Filter Canister
6.
Let the lid and filter canister dry.
7.
Replace lid on the canister and then replace
canister back into the cleaner body.
8.
Plug the power cord back into the control unit
and store the cleaner out of direct sunlight for
next use.
3.6 Storing the Cleaner
1.
Untangle any kinks and coils from the power
cable starting at the cleaner head.
2.
Store the cleaner out of direct sunlight.
FX35 models:
It is recommended when storing the cleaner for
extended periods, use the Zodiac transport caddy
Contact your local Zodiac pool specialist for details.
To store the cleaner on the caddy:
1.
Place cleaner in vertical position on the caddy
base and clip to hook.
3.
Disconnect the cable from the control unit.
Replace the protective cap on the control unit.
4.
Starting at the cleaner head, remove all coils
and tangles from the cable.
5.
Loosely coil the power cable starting at the
cleaner and moving toward the connection point
at control unit. Store the cable by wrapping
it around the hook located on the front of the
caddy.
Page
8
ENGLISH
Zodiac
®
FX20 FX30 FX35 Robotic Pool Cleaner
|
Owner's Manual