background image

21

5

• Make sure the control box is at least 3.5 metres from the edge of the pool and do not expose it to

direct sunlight.

• Never let anyone bathe in your pool while your robot is in the pool.

• To prevent any risk of electric shock, never open the electronic control box.  Call in a qualified

technician.

• Never try to repair the mains electricity cable. Contact the After Sales Service to have it replaced with

a genuine spare part to prevent hazard.

Your guarantee

These conditions are governed by the French legislation in force on the date of going to print.

1. Terms and Conditions

We guarantee that all our products are manufactured in compliance with current marketing standards

and that they are free from any material or manufacturing defects. Subsequent modifications made to our
products (improvements or modifications forming part of a technological advance of the product) shall not
give rise to our intervention.

The guarantee is restricted to either the repair or the replacement of the unit. The decision in this 

respect will be taken by us. The guarantee amount shall be no greater than the loss incurred and shall not
cause unreasonable costs to be borne by either the seller or the manufacturer.

The guarantee shall be legally invalidated if the appliance has been subject to any intervention by any

one not employed by our workshops or by a repair or service engineer not approved by us, or if any 
modifications have been made thereto without our written consent. The guarantee shall also be legally
invalidated if it has not been used in accordance with the instructions provided with appliance when 
purchased.

Any legal guarantee such as the guarantee described in Section 1641 of the Code of Civil Law applies.

Any enactment coming into force after publication of this guarantee, the terms of which concern law and
order would apply automatically even if different from the present document.

The following shall be excluded from the guarantee :

• Normal wear and tear of parts such as tracks, foam or rubber brushes, belts and filter bags.

• Electrical damage caused by lightening or poor electrical connection, inappropriate voltage or 

electrical power.

• Breakage due to impact damage.

In no circumstances may repairs or replacements effected under the guarantee extend, defer or renew the
guarantee period of the appliance.

2. Guarantee Period

The guarantee period shall be 2 years from the date of invoicing to the first user.

Summary of Contents for Sweepy M3











Reviews: