At least
three (3) feet
Suction Outlet
(Main Drain)
Suction Outlet
(Main Drain)
No valves between
Tee and Main Drains
Listed/certified to latest
published version of
ANSI/ASME
A112.19.8 - 2007
Anti-entrapment
Cover/Grate or Suction
Fitting, screw-fastened
to Main Drain Sump
Listed/certified to latest
published version of
ANSI/ASME
A112.19.8 - 2007
Anti-entrapment
Cover/Grate or Suction
Fitting, screw-fastened
to Main Drain Sump
Valves OK between
pump and Tee
Pump
Figure 1. number of Suction outlets Per Pump
Section 2. general description
2.1 introduction
This manual contains information for the proper
installation, operation and maintenance of Jandy Pro
Series Stealth (SHP) Pumps. Procedures in this manual
must be followed exactly. To obtain additional copies of
this manual contact Zodiac Pool Systems, Inc. ("Zodiac")
at 800.822.7933. For address information, see the back
cover of this manual.
2.2 description
SHP Pumps are designed to meet the needs of today’s
more hydraulically demanding pool equipment. The
pump housing, backplate, diffuser, hair and lint pot
(pump debris filter basket), and impeller are all made
from high quality thermoplastic materials. These
materials were chosen for their strength and corrosion
resistance.
The pump is driven by an electric motor directly attached
to the pump impeller. As the electric motor turns, it
causes the impeller to turn, which forces water to flow
through the pump. The water flows through the pump
inlet and then into the filter basket. The basket assembly
pre-strains and traps large particles. The water then
enters the center of the pump housing, flows through the
impeller into the diffuser, and then flows out the pump
discharge port.
Page 7
ENGLISH
Jandy
®
Pro Series Stealth
™
Pumps
|
Operation Manual
