Zodiac SIROCCO 110, Installation Instructions Manual, Page: 24 / 28

3
English
U-N single phase main supply 230Vac-1N-50Hz
U-V-W-N three phase main supply 400Vac-3N-50Hz
PE
Earth
N black
B blue
M brown
B1 command logic controller ECP 600
SD1 air inlet sensor (black sheath)
SD2 defrost sensor (grey sheath)
5-7-2-4-1 connection of Hygro Control (sie §1.3.7.4)
26-27
supply (230 V AC -50 Hz) for remote fault warning light or relaying
3-6 control of heating for PSA type boiler or an existing heating system
C-C
supply (230Vac-50Hz) for battery circulator or used for electric logic of the heating option
by electric backing
E1 high pressure switch
E2 low pressure switch
OAE back up heating option
R heating resistor
THS high limit thermostat (automatic reset)
THSM positive high limit thermostat (manual reset)
M1 ventilator motor (230Vac/50Hz)
M2 compressor motor (230Vac/50Hz)
KM1 power contactor of back up heating resistor
KM2 compressor power contactor
KA4 starting relay or phase order relay on Sirocco three phase
F2 Compressor internal thermal protection
C1 ventilator capacitor
C2 compressor capacitor
C3 filtering capacitor
C4 starting relay capacitor