background image

2

CONTENTS

❶ SPECIFICATIONS

 

3

1.1 I  Description

 

3

1.2 I  Technical specifications

 

3

1.3 I  Dimensions and marking

 4

❷ INSTALLATION

 

5

2.1 I  Selecting the location

 

5

2.2 I  Assembling the filter

 

6

❸ USE

 9

3.1 I  Operating principle

 9

3.2 I  Multiway valve positions

 9

3.3 I  Operation

 11

❹ MAINTENANCE

 

12

4.1 I  Winterizing

 

12

4.2 I  Maintenance

 

12

❺ TROUBLESHOOTING

 

13

• 

Before handling the appliance, it is essential that you read this installation and user manual, 

as well as the "warnings and warranty" booklet delivered with the appliance. Failure to do so 

may result in material damage or serious or fatal injury and will void the warranty.

• 

Keep these instructions for future reference for operation and maintenance works.

• 

The  distribution  or  modification  of  this  document  in  any  way  is  prohibited,  without  prior 

authorisation from Zodiac®.

• 

Zodiac®  is  constantly  developing  its  products  to  improve  their  quality.  The  information 

contained herein may therefore be modified without notice. 

Tip: to make it easier to contact your retailer

• 

Write down your retailer's contact details to help you find them more easily and fill in the "product" 

information on the back of the manual; your retailer will ask you for this information.

EN

Summary of Contents for MS FILTER D470

















Reviews: