background image

1

Recycling

This symbol means that your appliance must not be thrown into a normal bin. It will be selectively collected for the purpose 

of  reuse,  recycling  or  transformation.  If  it  contains  any  substances  that  may  be  harmful  to  the  environment,  these  will  be 

eliminated or neutralised. Contact your retailer for recycling information.

 WARNINGS

GENERAL WARNINGS

• 

Failure to respect the warnings may cause serious damage to the pool equipment or cause serious injury, even death.

• 

Only a person qualified in the technical fields concerned (electricity, hydraulics or refrigeration) is authorised to perform any 

servicing  or  repairs  to  the  appliance.  The  qualified  technician  working  on  the  appliance  must  use/wear  personal  protective 

equipment (such as safety goggles and protective gloves, etc.) in order to reduce the risk of injury occurring when working on 

the appliance.  

• 

Before handling the machine, ensure that it is switched off and isolated from the power supply.

• 

The appliance is intended to be used for pools and spas for a specific purpose; it must not be used for any purpose other than 

that for which it was designed.

• 

This  appliance  is  not  intended  for  use  by  persons  (including  children)  having  a  physical,  sensory  or  mental  disability,  or  by 

persons lacking experience or knowledge of the appliance, unless they are first instructed or are supervised during the use of the 

appliance by a person responsible for their safety.

• 

Keep the appliance out of the reach of children.

• 

The appliance must be installed according to the manufacturer’s instructions and in compliance with local and national standards. 

The  installer  is  responsible  for  installing  the  appliance  and  for  compliance  with  national  installation  regulations.  Under  no 

circumstances may the manufacturer be held liable in the event of failure to comply with applicable local installation standards.

• 

For any work other than the simple user maintenance described in this manual, the product should be referred to a qualified 

professional.

• 

Incorrect installation and/or use may cause serious damage to property or serious injuries (possibly causing death). 

• 

All equipment, even postage and packing paid, travels at the risks and perils of the recipient. The latter shall issue reserves in 

writing on the carrier's delivery slip if damage is detected, caused during transport (confirmation to be sent to the carrier within 

48 hours by registered letter). In the event that an appliance containing coolant has been turned on its side, mention your 

reservations in writing to the carrier.

• 

If the appliance suffers a malfunction, do not try to repair it yourself; instead contact a qualified technician.

• 

Refer to the warranty conditions for details of the permitted water balance values for operating the appliance.

• 

Deactivating, eliminating or by-passing any of the safety mechanisms integrated into the appliance shall automatically void the 

warranty, in addition to the use of spare parts manufactured by unauthorised third-party manufacturers.

• 

Do not spray insecticide or any other chemical (inflammable or non-inflammable) in the direction of the appliance, as this may 

damage the body and cause a fire.

• 

Zodiac® heat pump, filter pump and filter appliances are compatible with the most commonly used types of pool water treatment 

systems.

• 

Do not touch the fan or moving parts and do not place objects or your fingers in the vicinity of the moving parts when the 

appliance is in operation. Moving parts can cause serious injury or even death.

WARNINGS CONCERNING SAND FILTERS

• 

The filter is not a water disinfection system. Use a water treatment system complementary to filtration.

• 

Use only suitable filter medium (special swimming pool filtration glass or sand).

• 

Do not operate the filter without water.

• 

Switch off and disconnect the filter pump electrically then then close the isolation valve before working on the filter or the 

multiway valve.

• 

Never open the filter when the filter pump is in operation.

• 

It is strictly prohibited to handle the multiway valve when water is flowing in it.

• 

Do not immerse the appliance in water (with the exception of cleaners) or mud.

• 

Check that there is no air in the filter before turning it on; the presence of pressurised air could damage the filter. 

• 

The proof pressure of the filter is 2.5 bar (36 psi); never operate the filter above this pressure.

Summary of Contents for MS FILTER D470

















Reviews: