Page 29
ENGLISH
Zodiac
®
JXi
™
Gas-Fired Pool & Spa Heater
|
Installation & Operation Manual
8.6
Operating the Controller
Unless the heater is connected to a remote controller, all
operations are set up and programmed through the
control panel on the top of the heater. See
Figure 17
.
NOTE:
The display light reverts to OFF after two minutes of inactiv-
ity since the last key was pressed.
SPA
MENU
POOL
GAS HEATER IS OFF
PRESS POOL OR SPA
Figure 17. Main Control Panel
8.6.1
Setting up Heater Options
Before using the heater for the first time, set up the
following options:
•
Languages
: Set a display language
•
Temperature Scale
: Set temperatures to be displayed
in either Celsius or Fahrenheit scale
•
Display Light Timeout
: Set the display light to turn
off after a specific interval of inactivity
• To Program the Display Language
MENU
Heater must be in OFF mode to begin.
Hold for 5 Seconds.
or
SELECT USER
SETUP LANGUAGE
SELECT LANGUAGE
ENGLISH
MENU
or To Change Language
MENU
To Save
POOL
SPA
or
To Exit
To Program the Temperature Scale (F or C)
MENU
Heater must be in OFF mode to begin.
Hold for 5
Seconds.
or
SELECT USER
SETUP TEMPERATURE SCALE
SELECT TEMP SCALE
°F
MENU
or to Toggle °F and °C
MENU
To Save
POOL
SPA
or
To Exit
• To Program Display Light to Turn Off Automatically
MENU
Heater must be in OFF mode to begin.
Hold for 5 Seconds.
or
SELECT USER
SETUP DISPLAY LIGHT
SELECT DISPLAY LIGHT
2 MIN TIMEOUT
MENU
or to Toggle:
MENU
To Save
POOL
SPA
or
To Exit
