background image

97197

December 19, 2003

31

Oval Pool 

Escapade

25 Season Limited W25 Season Limited W25 Season Limited W25 Season Limited W25 Season Limited W

ararararar
rantyrantyrantyrantyranty

LIMITED WARRANTY - HOT DIPPED GALVANIZED STEEL AND RESIN COMPONENTS

Zodiac American Pools, Inc. (ZAP) warrants to the original purchaser only, all Metal parts to be rust resistant and all resin a

nd metal parts to be free of defects in

workmanship and material at the time of delivery and thereafter for a period of (25) seasons on a pro-rata basis, provided the 

part(s) are installed per the manufacturer’s

instructions.  Any claim must be reported to your authorized ZAP dealer or the Customer Service Department as soon as the defec

t is discovered.  Any return of merchandise

under terms of this warranty 

must be authorized in advance

.  

Proof of purchase will be required.

In accordance with above, any  “Metal” part which may prove to be unserviceable due to rust or any part which is found to be de

fective and if reported to ZAP Customer

Service Department before January 1 of the fourth calendar year immediately following purchase and delivery will be replaced fr

ee of charge.  After January 1 of the fourth

calendar year immediately following purchase and delivery and for the next (12) seasons any part found defective will be replac

ed at a pro-rated charge as follows:

1st Season

N

o Charge

6th Season

55

%

11th Season

80

%

 }

2nd Season

No Charge

7th 
Season

60

%

12th 

Season

85

%

 }

of the list price

3rd Season

No Charge

8th 
Season

65

%

13th 

Season

90

%

 }

at the time of

4th Season

40

%

9th Season

70

%

14th Season

through

 }

replacement

5th Season

50

%

10th Season

75

%

25th Season

95

%

 }

The above warranty is subject to the following conditions:

1.  

A season ends December 31st of the calendar year.

2.  During the first three seasons, ZAP will pay the freight cost of any metal or resin defective parts.  During the fourth thr

ough fifteenth seasons the freight costs

      will be paid by the purchaser.

3.  Any pool part replaced by ZAP pursuant to this warranty shall be installed or re-installed at Purchaser’s cost.

LIMITATION OF LIABILITY

IT IS EXPRESSLY AGREED THAT THERE ARE NO WARRANTIES MADE BY THE DEALER OR MANUFACTURER, EXCEPT THOSE STATED ABOVE.  ZAP DISCLAI

MS

ANY IMPLIED WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, EXCEPT TO THE EXTENT THAT SUCH DISCLAIMER MAY BE

PROHIBITED BY LAW DURING THE TERM OF THE WARRANTY STATED ABOVE.

     Under no conditions will ZAP or the dealer be responsible for labor charges, cost of loss of water or chemicals or any oth

er related damages caused by or related to this ZAP

product.  Warranty does not cover damage resulting from ice movement, improper maintenance or assembly.

     Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

     Some states do not allow the exclusions or limitation of incidental or consequential damages, so the above limitation or e

xclusion may not apply to you.

     This warranty gives specific legal rights, and you may also have other rights, which may vary from state to state.

     In the event that you wish to make a warranty claim, or have some questions about your ZAP product or its warranty, please

 call or write our Customer Service Department.

ZODIAC AMERICAN POOLS, INC.,  265 INDUSTRIAL BLVD., MIDWAY, GA 31320 PHONE: 912-880-7665 FAX: 912-884-4728

Summary of Contents for Escapade
































Reviews: