![background image](http://html1.mh-extra.com/html/zodiac/ei/ei_installation-and-user-manual_936480026.webp)
4.2 Language selection
The default language for your Ei is French. However the appliance is capable of displaying most
messages in the following languages: French, English, Spanish, Italian, German, Dutch and Afrikaner.
To select your language:
1. Switch on the Ei.
2. Wait for the completion of the initial boot sequence on the LCD screen (About 5 seconds).
3. Press and maintain pressed down the
key.
After about 5 seconds the current language will be displayed on the screen.
4. Maintain the
key pressed down until the desired language is displayed on the LCD screen.
5. Release the
key when the desired language is displayed. It will now be the language used to
display messages on the LCD.
4.3 Setting the clock (clock)
IMPORTANT REMARK:
Your Ei Zodiac chlorinator is equipped with an internal memory. During
the fi rst Ei electrical connection (Or upon re-initializing) it is important to leave the power on for at
least 24 hours uninterrupted (permanent power supply or forced operation). This will ensure that the
internal accumulator will be suffi ciently charged to store in memory all the operating parameters.
1. Turn power on.
2. Wait until the successful completion of the initialization sequence on the LCD screen (About 5 seconds).
3. Press down and maintain down the
key.
4. While maintaining the
key pressed, press the
key, in order to set the hours, until you reach
the desired hours value. (The
key can be maintained pressed to accelerate the incrementation).
5. While maintaining the
key pressed, press down the
key, in order to set the minutes,
until you reach the adjustment wanted. (The
key can be maintained pressed to accelerate the
incrementation).
6. Release the
key - the correct time has now been set on the clock.
NOTE: The clock uses a 24 hours display format.
Resetting the appliance:
1. When on the default LCD display press the
key.
2. After a few seconds the Ei device restarts and the clock is reset (‘00:00’).
3. Set the clock time using the procedure described above (
Setting the time
).
WARNING:
The reinitialisation of the appliance causes the loss of all previous settings (clock,
programmer…)!
!
!
26
4.4 Setting the timer
The Ei chlorinator is equipped with 2 timers that can be programmed so as to release chlorine during
time periods that are different from the fi ltration time, and this, up to twice per day.
Note that the timer periods must be included within the fi ltration periods (no chlorine will be released
when the fi ltration is not running).
IMPORTANT
: The use of the programmer is MANDATORY if the Ei chlorinator is connected to a
permanent power supply.
Setting the timer:
1. When on the default LCD display press the
key to go to ‘TIMER 1’ setting. An automatic message
will appear briefl y, then the following will be displayed: ‘TIMER 1 ON - - : - -’.
2. Press the
key to set the start-up hour (The
key can be held down to accelerate
incrementation).
3. Press the
key to set the start-up minutes (The
key can be held down to accelerate
incrementation).
4. Once the desired ‘ON’ time is set, press the
key in order to move on to the ‘OFF’ time setting:
‘TIMER 1 OFF - -: - -’ will be displayed.
5. Repeat steps 2 and 3 to set the stop time.
6. If you need to set a different time period, press the
key again in order to switch to ‘TIMER 2’ and
repeat steps 1 to 5 above (Once for the onset time and another time to set the stop time). If you do
not need to program another time setting, press the
key to return to the LCD default display.
NOTE:
once the programming of a time setting has been
made, a small ‘T’ icon will be displayed in the upper right
corner of your LCD screen.
NOTE:
When an ‘ON’ start time is defi ned a default stop time is proposed. To defi ne the stop time of
your choice just press the
and
keys to set the time.
To clear the timers:
1. When on the default LCD display press the
key. Wait until the ‘PRESS OUTPUT TO CLEAR
TIMERS’ message disappears.
2. Press the
key ; the ‘TIMERS CLEARED’ message will appear.
The Ei programming is now cleared.
3. Press the
key to return to the default LCD display.
4. If necessary re-programme the device (see Setting the timer).
!
!
27
27
EN
Summary of Contents for EI
Page 114: ......