background image

2

STEP 1 - POOL PREPARATION

Before installing the Zodiac Automatic Pool Cleaner, examine the interior of your pool carefully. If your vinyl liner is brittle or
has stones, wrinkles, roots or metal corrosion in contact with the underside of the liner, or has damage to the base material or
supporting walls, do not install the pool cleaner before having a qualified professional perform the necessary repairs.

Close the main drain. This allows the flow to be regulated by the Flowkeeper.

Manually vacuum the pool. This eliminates unnecessary adjustment later.

Clean the pool filter and empty the skimmer and pump strainer baskets. Filter pressure rises as debris is cleaned from the water,
thus reducing flow.

Divert the pool return inlets downward - (IMPORTANT!). Your Zodiac Automatic Pool Cleaner must move randomly throughout
the pool. Water circulating at the surface will influence the hose and limit coverage.

• To adjust the return inlet: loosen the lock ring and redirect the eyeball downward, then retighten the lock ring. If the eyeball is

difficult to adjust, insert a screwdriver inside the eyeball and gently adjust downward.

• If the return inlets cannot be pointed downward, then you 

MUST 

install Zodiac return line diverters. They are available through

your Zodiac dealer

.

TOP VIEW

SIDE VIEW

BEFORE ADJUSTMENT

AFTER ADJUSTMENT

FOR POOLS WITH RETURN INLET

DIRECTIONAL FITTINGS

Replace the directional eyeball
with Zodiac retrofit eyeball return 
line diverter and reinstall eyeball
retaining ring.

Part #W90153 for 
1

1

/

2

" return lines 

Part #W90155 for 
2" return lines

IF UNABLE TO ADJUST RETURN INLETS

OR FOR POOLS WITHOUT RETURN INLET

DIRECTIONAL FITTINGS

Use Zodiac universal return
line diverter (Part #W24100).
Pinch wires together and 
insert fully into return inlet.

TOP VIEW

SIDE VIEW

Thank you for purchasing this automatic pool cleaner from Zodiac. Prior to installing your pool cleaner,

review the parts and warranty information and insure that all parts shown are included with your unit.

Although the appearance of your model Zodiac Pool Cleaner may differ slightly from some

drawings shown in this installation guide, installation steps remain the same.

 

Summary of Contents for Baracuda G3













Reviews: