background image

Welcome

Congratulations on the purchase of your new Kreepy Kadet, the inground pool cleaner from
Pentair Pool Products. You’ll soon see that Kreepy Kadet really is the easy way to keep your inground
pool clean. First, however, you’ll have to install Kreepy Kadet and perhaps make some minor
adjustments. This manual covers the steps needed to install and adjust Kreepy Kadet.

Contents

Warranty Terms & Conditions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

I.

Pool Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

II.

Assembly  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6

III.

Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-8

IV.

Adjustments  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10

V.

Troubleshooting  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14

VI

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

VII.

Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

VIII.

Parts & Accessories  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Before you begin to install Kree py Kadet in your pool, please record its serial number in the space
below. This way, if you need to refer to the serial number in the future, it will be readily available.
The diagram on page 4, Figure 1 shows where the serial number is located.

Kreepy Kadet Serial Number: ___________________________________________

Activate Kreepy Kadet’s Warranty

You will also need to record the serial number on the warranty registration card found inside this
manual. Complete and return the card to activate Kreepy Kadet’s 1-year limited warranty. The
complete warranty is printed on the inside front cover of this installation and operation manual. 
Please review it thoroughly so you are familiar with the terms of your warranty coverage.

Customer Helpline

If you have questions about your Kree py Kadet, check the instructions in this manual first. If you
still have a question, call your Pentair Pool Products, Inc. dealer or call our Customer Helpline
at 1-800-443-5711. 
Please have your Kreepy Kadet serial number ready when you call.

Warranty Note

Cleaners purchased in the United States of America from entities outside the United States do not
qualify for any United States programs including warranty, trade-in, or rebate programs.

Summary of Contents for Kreepy kadet
















Reviews: