Zodiac AquaLink PDA PS4, Owner'S Manual

Page: 21 / 132

Page 21
ENGLISH
AquaLink
®
PDA | Installation and Operation Manual
5.7 Auto Shut-off Menu
The AUTO SHUT-OFF feature of the handheld remote can be set to a two (2) minute, five (5) minute, or
ten minute shut off. The display can be re-enabled by pressing the Power ON/OFF button.
NOTE
To conserve the batteries the PDA default is set to two (2) minutes.
5.7.1 To change the Auto Shut-off Time
Highlight MENU and press SELECT. Highlight PDA OPTIONS and press SELECT. Highlight SET AUTO-OFF and
press SELECT. Use the UP/DOWN arrow keys to set the time out value. Then press the SELECT button to continue.
5.6 AquaPure
®
Menu
NOTE
This equipment may not be part of your system. Please check with your installer.
AquaPure
®
chlorine generator systems exclusively communicate with the AquaLink PDA. The AquaLink PDA
handheld remote will display % of chlorine output. This menu item will only appear when an AquaPure chlorine
generator is connected to the AquaLink PDA system. If the system is for pool only/spa only configuration (Models
PDA-P4 and PDA-P8) a single setpoint screen will be displayed. If the system is for pool/spa combination
configuration (Models PDA-PS4, PDA-PS6 and PDA-PS8) a dual setpoint screen will be displayed.
5.6.1 To set the AquaPure
®
Output Percentage (%)
Highlight MENU and press SELECT, highlight SET AQUAPURE and press SELECT. Use the UP/DOWN arrow
keys to change the percentage. A single setpoint screen will appear for Pool only/Spa only configuration or a dual
setpoint screen will appear for for pool/spa combination configuration.
See Section 5.11 for BOOST options.
NOTE
When the chlorine generator output percentage is set to a value greater than 0 and the filter pump is on, the system
salinity level and output percentage appears on the equipment status screen.
MAIN MENU
BOOST
HELP
PROGRAM
SET TEMP
SET TIME
SET AQUAPURE
PDA OPTIONS
SYSTEM SETUP
SET AQUAPURE
SET TO 0%
Use ARROW KEYS
to set value.
Press SELECT
to continue.
Single Setpoint Screen
MAIN MENU
BOOST
HELP
PROGRAM
SET TEMP
SET TIME
SET AQUAPURE
PDA OPTIONS
SYSTEM SETUP
SET AQUAPURE
SET POOL TO 0%
SET SPA TO 0%
Highlight an item
and press SELECT
Dual Setpoint Screen
PDA OPTIONS
SET AUTO-OFF
BACKLIGHT
ASSIGN HOTKEYS
Choose setting
and press SELECT.
MAIN MENU
HELP
PROGRAM
SET TEMP
SET TIME
PDA OPTIONS
SET AUTO-OFF
2 MINUTES
5 MINUTES
10 MINUTES
Use ARROW KEYS
to set value.
Press SELECT
to continue.
SYSTEM SETUP