Zodiac AquaLink PDA PS4, Owner'S Manual

Page: 36 / 132

Page 36
ENGLISH
AquaLink
®
PDA | Installation and Operation Manual
6.15.9 To Set the Priming Speed
Whenever the variable speed pump is turned on it will go into the priming mode for a predetermined amount of time
(1-5 minutes). This menu allows for the priming speed to be adjusted.
NOTE
The priming parameters for the IntelliFlo
®
are set at the pump.
In the VSP SETTINGS menu, highlight PRIME and press SELECT. Use the UP/DOWN arrow keys to highlight the
desired pump, then press SELECT. Use the UP/DOWN arrow keys to highlight SET SPEED, then press SELECT.
Use the UP/DOWN arrow keys to set value, then press SELECT.
6.15.8 To Assign Speeds to Auxiliaries
This menu allows the user to assign a speed to an auxiliary. When the assigned auxiliary is turned on the pump will
switch to the speed that was assigned to the aux. If more than one aux is on and if both of them have speeds assigned,
the pump will operate at the higher of the two speeds.
In the VSP SETTINGS menu, highlight SPEED/LABELS and press SELECT. Use the UP/DOWN arrow keys to
highlight the desired pump, then press SELECT. Use the UP/DOWN arrow keys to highlight ASSIGN SPEEDS, then
press SELECT. Use the UP/DOWN arrow keys to highlight the desired auxiliary, then press SELECT. Use the UP/
DOWN arrow keys to highlight the desired speeds, then press SELECT.
VSP SETTINGS
PUMP MODEL
PUMP APPLICATION
MIN-MAX SETTINGS
SPEED/LABELS
PRIME
Highlight an item
and press SELECT
PRIME SETTINGS
PUMP 1
PUMP 2
PUMP 3
PUMP 4
Highlight an item
and press SELECT
PRIME SETTINGS
PUMP 1
SET SPEED
SET DURATION
ASSIGN SPEEDS
Highlight an item
and press SELECT
ASSIGN SPEEDS
PUMP 1
AUX 1
AUX 2
AUX 3
AUX 4
AUX 5
AUX 6
AUX 7
ASSIGN SPEEDS
AUX 1
SPEED1
SPEED2
SPEED3
SPEED4
SPEED5
SPEED6
SPEED7
SPEED8
X
6.15.7 To re-label the Speed Preset
Each of the eight (8) default speed presets has a label and each of those labels can be changed from the default value.
In the SPEED SETTINGS menu, highlight LABEL SPEEDS and press SELECT. Use the UP/DOWN arrow keys
to highlight the desired label, then press SELECT. Use the UP/DOWN arrow keys to highlight either GENERAL
LABELS or CUSTOM LABELS, then press SELECT.
LABEL POOL
CURRENT LABEL
POOL
GENERAL LABELS
CUSTOM LABELS
LABEL POOL
GENERAL LABELS
POOL
AERATOR
AIR BLOWER
BACKWASH
BOOSTER PUMP
CHEM FEED
CLEANER
SPEED/LABELS
PUMP 1
SET SPEEDS
LABEL SPEEDS
ASSIGN SPEEDS
Highlight an item
and press SELECT
LABEL SPEEDS
POOL
SPA
SPEED3
SPEED4
POOL HEAT
SPA HEAT
SOLAR HEAT
INFLOOR