ZMC306X Motion Controller User Manual V1.5
The Ethernet port of the controller can be connected to a computer, HMI, etc. through
an Ethernet cable, and using point to point connection method. The schematic diagram
is as follows:
The controller can also be connected to the interchanger through an Ethernet cable,
and then use interchanger to connect to other devices, then multi-point connection can
be achieved. The schematic diagram is as follows:
→
Communication Cable Requirements
Both ETHERNET communication interface and EtherCAT communication interface
adopt standard Ethernet RJ45 interface.
The network cable adopts Category 5e STP, and the crystal head has a metal shell to
reduce interference and to prevent information from being eavesdropped. As shown below:
Summary of Contents for ZMC306X
Page 1: ......
