XPCI1C00 Motion Control Card User Manual V1.0
switch is disconnected, EL± is valid, and the mechanical parts are prohibited from
continuing to move in the original direction.
3.6.2.
Position Sensor & Signal Distribution
The X300 and X301 signal interfaces define dedicated IOs, which are used to access
signals such as origin, limit, and alarm. The configuration of the sensor can refer to the
figure below.
3.6.3.
Basic Usage Method
1.
Please follow the above wiring instructions to wiring correctly.
2.
After powered on, please connect to ZDevelop.
3.
State values of corresponding input can be read
directly through “IN” command, or
they can be checked through “ZDevelop/View/In”.