ZMODO SFN6 User Manual Download Page 13

Page: 13 / 22

Remote controller operation: Use “
Mouse operation: Left
detection.
For detailed operation procedures, please refer to the manual in the CD.

2.8 Network setup

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as
shown belo

TYPE
STATIC
DHCP

After  selecting  the  DHCP  mode,  restart  the  system  after  confirmation.  After  starting,  the
system  will
successful,  this  unit  will  be  allocated  with  an  IP  address,  which  will  be  displayed  on  the
screen.

PPPOE

PPP

Internet service provider.

MEDIA PORT

DVR and PC
service, please modify it to an

WEB

WEB port to any other port, such as 88, you have to postfix the IP with the port number,
and

IP
SUBNET
GATEWAY

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

DNS

can refer to the domain name server configurations of the PC.

UPNP:

the DVR will map the port and IP into the router automatically.

DDNS S

Click “DDNS Setup” to enter the screen (picture

Remote controller operation: Use “
Mouse operation: Left
detection.
For detailed operation procedures, please refer to the manual in the CD.

2.8 Network setup

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as
shown belo

TYPE

TATIC

DHCP

PPPOE

PPPO

Internet service provider.

EDIA PORT

DVR and PC
service, please modify it to an

WEB

WEB port to any other port, such as 88, you have to postfix the IP with the port number,
and enter “

IP ADDRESS
SUBNET

ATEWAY

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

DNS

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

UPNP:

the DVR will map the port and IP into the router automatically.

DDNS S

Click “DDNS Setup” to enter the screen (picture

Remote controller operation: Use “
Mouse operation: Left
detection.
For detailed operation procedures, please refer to the manual in the CD.

2.8 Network setup

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as
shown belo

TYPE:

with 3 options: STATIC

TATIC

DHCP

: acquiring an IP address automatically

PPPOE

: broadband dial

Internet service provider.

EDIA PORT

DVR and PC
service, please modify it to an

WEB PORT

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

enter “

ADDRESS

SUBNET

ATEWAY

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

UPNP:

the DVR will map the port and IP into the router automatically.

DDNS S

Click “DDNS Setup” to enter the screen (picture

Remote controller operation: Use “
Mouse operation: Left
detection.
For detailed operation procedures, please refer to the manual in the CD.

2.8 Network setup

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as
shown belo

with 3 options: STATIC

allocating an IP address manually

: acquiring an IP address automatically

: broadband dial

name and password

Internet service provider.

EDIA PORT

DVR and PC
service, please modify it to an

PORT

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

enter “

ADDRESS

SUBNET MASK

ATEWAY

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

When the UPNP function is on

the DVR will map the port and IP into the router automatically.

DDNS SETUP

Click “DDNS Setup” to enter the screen (picture

Remote controller operation: Use “
Mouse operation: Left
detection.
For detailed operation procedures, please refer to the manual in the CD.

2.8 Network setup

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as
shown belo

with 3 options: STATIC

allocating an IP address manually

: acquiring an IP address automatically

: broadband dial

name and password

Internet service provider.

EDIA PORT

DVR and PC
service, please modify it to an

PORT

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

enter “http://192.168.1.19:88

ADDRESS

MASK

ATEWAY

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

When the UPNP function is on

the DVR will map the port and IP into the router automatically.

ETUP

Click “DDNS Setup” to enter the screen (picture

Remote controller operation: Use “
Mouse operation: Left

For detailed operation procedures, please refer to the manual in the CD.

2.8 Network setup

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as
shown below:

with 3 options: STATIC

allocating an IP address manually

: acquiring an IP address automatically

After  selecting  the  DHCP  mode,  restart  the  system  after  confirmation.  After  starting,  the
system  will  establish  a  connection  with  the  DHCP  server  automatically.  When  this  is
successful,  this  unit  will  be  allocated  with  an  IP  address,  which  will  be  displayed  on  the

: broadband dial

name and password

Internet service provider.

EDIA PORT

: the port number used in the private protocol communicatio

DVR and PC, usually being 9000 by default. If this port of the PC
service, please modify it to an

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

http://192.168.1.19:88

ADDRESS

: allocating an IP address according to the network environment of the DVR

MASK

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

When the UPNP function is on

the DVR will map the port and IP into the router automatically.

ETUP

Click “DDNS Setup” to enter the screen (picture

Remote controller operation: Use “
Mouse operation: Left

For detailed operation procedures, please refer to the manual in the CD.

2.8 Network setup

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

with 3 options: STATIC

allocating an IP address manually

: acquiring an IP address automatically

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

: broadband dial

name and password

Internet service provider.

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

service, please modify it to an

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

http://192.168.1.19:88

: allocating an IP address according to the network environment of the DVR

MASK

: filling in a subnet mask accordi

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

When the UPNP function is on

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture

Remote controller operation: Use “
Mouse operation: Left

For detailed operation procedures, please refer to the manual in the CD.

2.8 Network setup

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

with 3 options: STATIC

allocating an IP address manually

: acquiring an IP address automatically

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

: broadband dial

name and password

Internet service provider.

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

service, please modify it to an

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

http://192.168.1.19:88

: allocating an IP address according to the network environment of the DVR

: filling in a subnet mask accordi

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

When the UPNP function is on

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture

Remote controller operation: Use “
Mouse operation: Left

For detailed operation procedures, please refer to the manual in the CD.

2.8 Network setup

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

with 3 options: STATIC

allocating an IP address manually

: acquiring an IP address automatically

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

: broadband dial

name and password

Internet service provider.

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

service, please modify it to an

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

http://192.168.1.19:88

: allocating an IP address according to the network environment of the DVR

: filling in a subnet mask accordi

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

When the UPNP function is on

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture

Remote controller operation: Use “
Mouse operation: Left-

For detailed operation procedures, please refer to the manual in the CD.

2.8 Network setup

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

with 3 options: STATIC

allocating an IP address manually

: acquiring an IP address automatically

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

: broadband dial

name and password

Internet service provider.

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

service, please modify it to an

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

http://192.168.1.19:88

: allocating an IP address according to the network environment of the DVR

: filling in a subnet mask accordi

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

When the UPNP function is on

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture

Remote controller operation: Use “

-click the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

2.8 Network setup

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

with 3 options: STATIC

allocating an IP address manually

: acquiring an IP address automatically

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

: broadband dial-up network access, as shown on the right picture

name and password

Internet service provider.

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

service, please modify it to an

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

http://192.168.1.19:88

: allocating an IP address according to the network environment of the DVR

: filling in a subnet mask accordi

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

When the UPNP function is on

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture

Remote controller operation: Use “

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

with 3 options: STATIC

allocating an IP address manually

: acquiring an IP address automatically

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

name and password

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

service, please modify it to an

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

http://192.168.1.19:88

: allocating an IP address according to the network environment of the DVR

: filling in a subnet mask accordi

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

When the UPNP function is on

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture

4/8/16

Remote controller operation: Use “

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

with 3 options: STATIC, DHCP and PPPOE

allocating an IP address manually

: acquiring an IP address automatically

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

name and password

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

service, please modify it to another

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

http://192.168.1.19:88

: allocating an IP address according to the network environment of the DVR

: filling in a subnet mask accordi

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

When the UPNP function is on

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture

4/8/16

Remote controller operation: Use “

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

, DHCP and PPPOE

allocating an IP address manually

: acquiring an IP address automatically

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

other

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

http://192.168.1.19:88

: allocating an IP address according to the network environment of the DVR

: filling in a subnet mask accordi

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

When the UPNP function is on

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture

4/8/16

Remote controller operation: Use “

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

, DHCP and PPPOE

allocating an IP address manually

: acquiring an IP address automatically

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

other

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

http://192.168.1.19:88” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

: filling in a subnet mask accordi

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

When the UPNP function is on

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture

4/8/16Channel DVR Quick Manual

Remote controller operation: Use “

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

, DHCP and PPPOE

allocating an IP address manually

: acquiring an IP address automatically

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

other unused port.

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

: filling in a subnet mask accordi

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If
there is a router device, you have to set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

When the UPNP function is on

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture

Channel DVR Quick Manual

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

, DHCP and PPPOE

allocating an IP address manually

: acquiring an IP address automatically

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

unused port.

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

: filling in a subnet mask accordi

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

When the UPNP function is on

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture

Channel DVR Quick Manual

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

, DHCP and PPPOE

allocating an IP address manually

: acquiring an IP address automatically

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

unused port.

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

: filling in a subnet mask accordi

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

(UPNP function on the router end

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture

Channel DVR Quick Manual

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

, DHCP and PPPOE

: acquiring an IP address automatically

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

unused port.

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

: filling in a subnet mask accordi

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

(UPNP function on the router end

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture

Channel DVR Quick Manual

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

, DHCP and PPPOE

: acquiring an IP address automatically (left picture below)

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

unused port.

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

: filling in a subnet mask accordi

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

(UPNP function on the router end

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture

Channel DVR Quick Manual

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

, DHCP and PPPOE

(left picture below)

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

unused port.

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

: filling in a subnet mask according to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

(UPNP function on the router end

the DVR will map the port and IP into the router automatically.

Click “DDNS Setup” to enter the screen (picture below

Channel DVR Quick Manual

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

(left picture below)

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

unused port.

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

(UPNP function on the router end

the DVR will map the port and IP into the router automatically.

below

Channel DVR Quick Manual

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

(left picture below)

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

(UPNP function on the router end

the DVR will map the port and IP into the router automatically.

below

Channel DVR Quick Manual

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

(left picture below)

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

(UPNP function on the router end

the DVR will map the port and IP into the router automatically.

below):

Channel DVR Quick Manual

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

(left picture below)

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

(UPNP function on the router end

the DVR will map the port and IP into the router automatically.

Channel DVR Quick Manual

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

(left picture below)

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

(UPNP function on the router end

the DVR will map the port and IP into the router automatically.

Channel DVR Quick Manual

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

(left picture below)

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

can refer to the domain name server configurations of the PC.

(UPNP function on the router end

the DVR will map the port and IP into the router automatically.

Channel DVR Quick Manual

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

(left picture below)

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

(UPNP function on the router end

the DVR will map the port and IP into the router automatically.

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

, usually being 9000 by default. If this port of the PC is occupied by any other

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

(UPNP function on the router end

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

is occupied by any other

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

set the corresponding gateway.

: setting the IP address of the domain name server (DNS varies from city to city); you

(UPNP function on the router end

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

is occupied by any other

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

: setting the IP address of the domain name server (DNS varies from city to city); you

(UPNP function on the router end

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

For detailed operation procedures, please refer to the manual in the CD.

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

up network access, as shown on the right picture be

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

is occupied by any other

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

: setting the IP address of the domain name server (DNS varies from city to city); you

(UPNP function on the router end

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

below

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communicatio

is occupied by any other

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

: setting the IP address of the domain name server (DNS varies from city to city); you

(UPNP function on the router end is al

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

low

: Fill in the PPPOE user name and password provided by the

: the port number used in the private protocol communication between the

is occupied by any other

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

: setting the IP address of the domain name server (DNS varies from city to city); you

is al

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

low:

: Fill in the PPPOE user name and password provided by the

n between the

is occupied by any other

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

: setting the IP address of the domain name server (DNS varies from city to city); you

is also on

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

: Fill in the PPPOE user name and password provided by the

n between the

is occupied by any other

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

: setting the IP address of the domain name server (DNS varies from city to city); you

so on

“ (display mode) to select full screen or blank;

ick the mouse and drag the motion box to set the area of dynamic

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

: Fill in the PPPOE user name and password provided by the

n between the

is occupied by any other

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

: setting the IP address of the domain name server (DNS varies from city to city); you

so on), then

ick the mouse and drag the motion box to set the area of dynamic

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

: Fill in the PPPOE user name and password provided by the

n between the

is occupied by any other

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

: allocating an IP address according to the network environment of the DVR

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

: setting the IP address of the domain name server (DNS varies from city to city); you

), then

ick the mouse and drag the motion box to set the area of dynamic

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

: Fill in the PPPOE user name and password provided by the

n between the

is occupied by any other

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

” in the address bar when accessing the DVR via the IE.

ng to the network environment of the DVR

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

: setting the IP address of the domain name server (DNS varies from city to city); you

), then

ick the mouse and drag the motion box to set the area of dynamic

Enter the “Network” screen from “Main Menu” →“Advanced” to “Network Setup”, as

After selecting the DHCP mode, restart the system after confirmation. After starting, the

establish a connection with the DHCP server automatically. When this is

successful, this unit will be allocated with an IP address, which will be displayed on the

: Fill in the PPPOE user name and password provided by the

n between the

is occupied by any other

: the http port, usually being 80 by default. If the administrator modifies the

WEB port to any other port, such as 88, you have to postfix the IP with the port number,

: Setting the gateway according to the network environment of the DVR. If there

is no router device in the network, please allocate an IP address on the same network. If

: setting the IP address of the domain name server (DNS varies from city to city); you

), then

Summary of Contents for SFN6























Search results

Summary of Contents for SFN6

Reviews:

Related manuals for SFN6

Brands by name

Popular brands

ZMODO SFN6, User Manual

Search results

Summary of Contents for SFN6

Reviews:

Related manuals for SFN6

Brands by name

Popular brands