ZMODO 16CH DVR, User Manual

Page: 28 / 43

User Manual for Zmodo DVR
27
4.8.2.2 Device Parameters Settings
Click , the parameters configuration screen will appear. All of the configurations are divided
into the following six selections:
*
Server
This includes the configuration of server, network, and version information. All of these configurations
can be set in [Tool
Bar]→[System].
Note : If the DHCP mode selected, the IP address is assigned automatically without being modified.
*
Channel
User can set motion detection, video loss, OSD, image bit rate and frame rate, image parameters and
record schedule here.
Note : User is allowed to set a single channel first, and then to copy the settings to the other channels.
*
Serial
User can set PTZ protocol, baud rate, and address code here. All of these settings can also be done by
selecting on the DVR [Tool
Bar]→[System]→[Video].
*
Alarm
User can set IO alarm and event handling here. All of these settings can be done by selecting on the
DVR [T
ool Bar]→[System]→[Alarm].
*
User Management
Includes user authority and password settings. This will be found on the DVR at <Tool
Bar>→<System>→<System Setting>→<Advanced Setting>, “User” authority and password can only
be changed
by “Admin” account.
*
Device
Upgrade: Click [Browse] to select the software package needed, and click [Start Upgrade] to progress.
User can stop the progress of upgrade by clicking [Stop Upgrade].
Adjust Time: Click [Adjust Time] to adjust time of device accordance with the PC time.
WARNING : Changing times on the DVR will make previously recorded files unsearchable
*
State
The information of HDD and channel state is contained here.