ZMODO 16CH DVR, User Manual

Page: 16 / 43

User Manual for Zmodo DVR
15
*
Image Parameters Setting
Please enter <Tool
Bar>→<System>→<Video>→<Color Setting> to set brightness, contrast, hue and
saturation. It will take effect instantly.
Note1 : User can set image parameters of one channel one at a time or all channels at once by
selecting
【
All
】
in <Camera Channel>.
Note2: In preview mode, brightness, contrast can be adjusted by remote controller directly.
*
OSD Settings
The OSD of channel name and system time is supported. Please enter <Tool
Bar>→<System>
→<Record Setting>→<OSD Setting> to set. The channel name will be displayed on upper left corner
and the channel time will be displayed on the upper right corner of the camera window.
*
Channel Status Display Area
The channel statuses include:
“motion detection triggered recording” / “common recording” / “motion
recording”/ “alarm triggered recording” / “external alarm input” /“alarm output”.
Indication
of “motion detection” / “common recording” / “alarm recording” will be displayed on the right
upper corner of screen. The details are as follows:
Indicates
“motion detected”. The settings of motion detection include sensitivity and area
selection. Please
see “
Motion Detection Settings
” for details.
Blue indicates
“common recording”. Please see Record for details.
Green indicates “motion detection triggered recording”.
Red indicates
“alarm triggered recording”.
Grey indicates
“manual recording”.
Indication
of “external alarm input” / “alarm output” will be displayed on system status bar or Tool Bar.
The details are as follows:
: The 4/8 icons indicate the alarm input status. If alarm record mode is set, the icon is ,
otherwise it is . When triggered, it changes into red , External alarm input can trigger multiple
events handling rules. Please see Alarm Settings section for details.
: This icon indicates an alarm output. When the alarm output is in effect it will display this symbol.