ZMODO 16CH DVR, User Manual

Page: 19 / 43

User Manual for Zmodo DVR
18
4.3.1 Manual Record
Please enter <Tool
Bar>→<Manual Record> to enable or disable manual record on specific channels.
Press the
【 ● 】
button to start/stop recording manually.
Note1
: The video type shown in the playback menu for “Manual Record” will appear as “Common
Record”
Note2 : When Manual Record is enabled, it takes precedence over any Record Schedule settings.
4.3.2 Record Schedule
Please enter<Tool
Bar>→<System>→<Record Setting> to set record schedule. The setting screen is
shown as the figure below:
Area 1: The current recording channel number.
Area 2: The record schedule.
Area 3: Description of record type.
The grid based recording schedule allows users to customize a schedule by inputting different record
types for days of the week on horizontal columns and hours of the day on vertical columns as matches
the users’ needs.
①
Move highlight icon to a time grid using
【
Direction
】
buttons.
②
Specify the recording type by repeat pressing
【
OK
】
button or double left clicking mouse,(the color
of the grid will change relevantly). Alternatively with the mouse you may click on a record type selection
at the bottom and then click and drag across the grid to change large grid portions at once.
③
Select
【
OK
】
to confirm settings. The settings will take effect after being saved.
Note1 : User can copy the current Record type onto the neighboring grid by pressing
【
FN
】
button first ,
【
Direction
】
buttons secondly, and then the
【
FN
】
button again to exit.
Note2 : When motion detection recording is selected, the motion detection sensitivity and area should
be set to match your needs. Please refer to
“
4.4.2 Motion Detection Settings
” for details. When alarm
recording is selected, the alarm triggering settings should be set to match your needs. Please refer to
“
4.7.2 Event Handling
” for details.