Zline RBIV-30, Installation Manual

Page: 25 / 44

After carefully pushing the product into the cabinet, the feet need to be raised in order
to secure the product to the anti-tip brackets.
Adjusting the height of the refrigerator in the cabinet.
• Adjust the refrigerator height using the adjustable feet.
First, raise the front feet to reduce the risk of the product falling frontward.
A/D –Turn the key clockwise to lift the front
B/C –Turn the key clockwise to lift the rear
• After adjusting the feet, check if the product is level in both width and
depth directions. You may readjust as needed after panels are installed.
The maximum height that the adjustable feet can reach is 1 9/16" (40 mm)
and the product height is 85 3/8" (2,169 mm)
WARNING
INSTALLATION
i
Adjusting the refrigerator according to the cabin flange
• For products with clad doors, the position of the refrigerator is
adjusted so that the door and the cabinet surface are flush. You can
also use a position alignment gauge (Item No10) if necessary.
• For products without clad doors, the product is placed using the
position alignment gauge (Item No10) as shown in the figure
below.
INFO
INSTALLATION
43
Cabinet Installation
44
Cabinet Installation