Zline RBIV-30, Installation Manual

Page: 24 / 44

i
If you have difficulty tightening the screws, opening a reference hole
with the drill will make this procedure easier.
Screwing the upper bracket
• Attach the upper bracket to the cabinets with 4 screws (Item No16).
INFO
INSTALLATION
i
You can use tape and similar protectors on parts you think are
necessary to protect the edges of the cabinets when placing the
product.
INFO
The plug of the product must be accessible after installation. If the plug is
not accessible after installation, the power must be cut off from the main
switch.
WARNING
Make sure that the main water line and power cable are not jammed
when moving the refrigerator.
• Push the product carefully towards the cabinet to place it. If there is
strain during the placement of the product into the cabiniet:
- The floor might be rough or uneven
- Adjustable feet might be loose (please see the relevant section
to learn how to adjust the adjustable feet)
• You must attach the Freezer Door temporarily to align the product
before placing it.
You must use the upper edges of the Freezer Door when aligning the
product with the cabinets. Adjustment of other edges are explained in
the following pages.
WARNING
i You must use the upper edges of the Freezer Door when aligning the
product with the cabinets.
Adjustment of other edges are explained in the following pages.
INFO
INSTALLATION
41
Cabinet Installation
42
Cabinet Installation