2
Safety Precautions
This section presents important information intended to ensure safe and
effective use of this printer.
Warming:
Scratch Warning: Never try to touch the auto cutter or jagged teeth.
Scald Warning: To avoid been burned, please do not touch the printer
head.
Shock Warning: Please cut off the power before you Plug/Unplug the
power cable from the printer.
Cautions:
1) Please apply the power adapter to a stable voltage (110-220V ), please do
not use other devices on the same power outlet to avoid voltage
fluctuation.
2) Install the printer on a flat and stable surface to avoid printer suffered
from any vibration and shocks.
3) If water or other liquid spills into the printer, unplug the power cord
immediately and contact your dealer or service center for advice.
4) Disconnect the power cord if the printer is idle for a long time.
5) Please ensure the switch button is “off” before you plug the power cord.
6) The printer should only be disassembled or repaired by a technician.
7) Please strictly follow the recommended use tips of this manual.