12
Path:
My Computer - Properties - Management - Devices Manager - Universal
Serial Bus Controller ), if not
please recheck the cable and printer connecting way.
2. Click “ General ”and let back to this step then “ Print Test Page “
If the print test page works well, that mean all setting is ok.
Remarks: If “ Printer Error “ , we should back to “ Ports” and try the USB ports one
by one until it is ok.
5.2.2 Ethernet Connection
(If your desired port is Ethernet )
1. Get the IP address from a Self Printing Test Paper
Switch off the printer then press “FEED” button and do not release. Press the
“POWER” button at the same time till the “ ERROR” indicators on, release the
button about 1 second after the “ERROR” indicators off. Then we can read the
current setting from the self printing page. (Default IP Address is
：
192.168.1.100
）
Open “ Properties” then click “ Ports ” , as below images shown: