24
Step 4:
About the printer “Function Set”, you can set Print Mode (Chinese/ASCII), Beep
Set (ON/OFF), Cutter set (ON/OFF), Print Density (Level 1 to Level 4), Serial Baud
Rate (9600, 19200, 38400, 57600, 115200), Front set (Front_1, Front_2 and
Front_3, ).
After all the setting are done, please power off and restart the printer. Step 5:
You also can do the “Factory Reset” and print the “Self-test page” by this tool. If all
is done, please click “ EXIT” to close the tool