ZKTeco iClock 885, User Manual

Page: 110 / 114

AUTOTEST
110
14
Once you select the Cam testing you can test the camera to see if it is work-
ing properly and getting proper images of the user
14.6 CAM TESTING
Select
Cam testing
and Press
OK
14.5 TEST FINGERPRINT SENSOR
The terminal automatically tests whether the fingerprint collector works
properly by checking whether the fingerprint images are clear and acceptable.
When the user places his/her finger in the fingered guide, the collected finger-
print image is displayed on the screen in real-time. Press [ESC] to exit the test
14.7 TEST CLOCK RTC
Test Clock RTC: The terminal tests whether its clock works properly by
checking the stopwatch of the clock. Touch the screen to start counting, and
touch it again to stop to check whether the counting is accurate. Press [ESC]
to exit the test.
14.3 TEST VOICE
Here you can test the different voice wav file. To continue the voice test
press
OK
and to exit press ESC
14.4 TEST KEYBOARD
The terminal tests whether every key on the keyboard works normally. Press
any key on the [Keyboard Test] interface to check whether the pressed key
matches the key displayed on screen. The keys are dark-gray before pressed,
and turn blue after pressed. Press [ESC] to exit the test.