ProBio & ProFAC User Manual
23
In the initial interface, press
>
Comm.
>
Wiegand Setup
>
Card format detect automatically
to
enter the
Card format detect automatically
interface.
Operating Procedure:
1.
After entering the
[Card Format Detect Automatically]
interface of an ID device, swipe the ID
card above the card reader (on the local device or auxiliary card reader), the interface will show the
automatically detected Wiegand formats and the analyzed card numbers.
2.
Choose the item corresponding to the actual card number as the device’s
[Wiegand format]
,
which is the Wiegand format for reading that type of card.
NOTE:
In the
[Card format detect automatically]
interface of an IC device, the device cannot
detect the card number or Wiegand format only by swiping an IC card. For detecting the Wiegand
format of an IC card, it is needed to connect an IC card reader with the device and swipe an IC card
above the auxiliary card reader, so that the device will show the card number and the Wiegand format.