ProBio & ProFAC User Manual
27
In the initial interface, press
>
System
>
Reset
>
OK
to finish the reset
setting.
Reset parameters include Access Control Options, Anti-passback Setup, communication setting (namely,
the setting of Ethernet, Serial Comm., PC Connection and Wiegand Setup), Personalize (such as Voice
Prompt, Keyboard Prompt, Volume and Idle Time To Sleep) etc.
Parameters
Factory Defaults
Access Control Options
Door Lock Delay: 5 seconds
Door Sensor Delay: 10 seconds
Door Sensor Type: Normal Open (NO)
Verification Mode: Password / Fingerprint / Badge / Face
Door available time period: 1
NO Time Period : None
Use as master: In
Aux output / Lock open time: 255 seconds
Aux output type setting: trigger door open
Speaker Alarm: OFF
Anti-passback Direction
No anti-passback
Ethernet
IP Address: 192.168.1.201
Subnet Mask: 255.255.255.0
Gateway: 0.0.0.0
PC Connection
Comm Key: 0
Device ID: 1
Wiegand Setup
Wiegand Input / Output ID Type: User ID
Pulse Width: 100 us
Pulse interval: 1000 us
Idle Time To Slide Show
30 seconds
Idle Time To Sleep
30 minutes
Menu Screen Timeout
60 seconds
Keyboard Prompt
ON
Voice Prompt
ON
Volume
70
NOTE:
When resetting to factory settings, the user information, date and time will not be affected.
For example, if the device date and time are set to 18:30 on January 1, 2020, the date and time will