G4L
User Manual
P a g e
| 33
Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Set the Verification Mode
•
On the
Access
Group
interface, tap on
Verification Mode
to set the verification type for the user.
•
On the
Verification Mode
interface, select the required verification type from the list.
Duress Fingerprint
•
On the Access Control Interface, tap on Duress Fingerprint to go to the duress fingerprint page.
•
The user may specify one or more fingerprints to register as duress fingerprint(s). Hence, once the
user presses the corresponding finger on the sensor, and if the verification is successful, then the
system will immediately generate the alarm.
