CMP-300
User Manual
P a g e
| 15
Copyright©2021 ZKTECO CO., LTD. All rights reserved.
7
Control Board Wiring Installation
•
Remove
the wiring cover of the barrier gate main controller.
•
Refer
to the wiring diagram of the barrier gate controller and connect
the lines one by one firmly. (Note: Power must be disconnected before
installation or maintenance.)
•
After
checking and confirming reliable wiring, install the wiring cover
back.
•
Install the Desktop Remote Control
: Place the Desktop Remote
Control on the table in the guard room or attach it to the wall and
plug-in the power
.
The
wiring diagram of the controller is as follows
:
