SW3
GIGABIT/FAST ETHERNET SWITCH TYPE SW3 (DIN)
71/122
USER GUIDE - M0SW3D1905Iv04 - V04 May 2019
The configuration parameters are the following:
IGMP:
There is a single parameter that determines whether the emulation as IGMP router is active
or not:
•
Enable.
A simple
CheckBox
parameter to set if the IGMP periodic consultation
service is active or not.
IGMP Snooping:
It is a feature that permits the switch to analyze the multicast traffic between devices and
routers in order to identify the ports where there are devices actively participating in
multicast groups; the objective is to limit selective data transmission based on the obtained
information.
•
Enable.
A simple
CheckBox
to set if the IGMP periodic consultation service is active
or not.
•
#.
It sets the equipment physical port number.
•
IGMP forward.
It sets the treatment of the multicast messages in the corresponding
port. Configured in
on
, the port transmits all the multicast messages, while it does
not transmit anything when it is
off
. Configured in
auto
, the port will selectively
transmit the multicast messages if there are client devices registered in the
corresponding group.
FIGURE 40
IGMP
configuration page of
Multicast
menu