SW3
GIGABIT/FAST ETHERNET SWITCH TYPE SW3 (DIN)
29/122
USER GUIDE - M0SW3D1905Iv04 - V04 May 2019
LEDs associated with 10/100Base-Tx (RJ-45) ports
Speed/Link/Ac LED
Two-coloured. There is one LED per port. It stays on when the
link is established correctly and flashes in the case of emission
or reception activity in the interface. It lights up in green at
100 Mbit/s and in amber at 10 Mbit/s.
Duplex/Col. LED
Amber. There is one LED per port. It stays on when the
transmission is Full-duplex and goes off when the transmission
is Half-duplex. It flashes in the case of collision.
LEDs associated with 100Base-Fx (multimode, MT-RJ or, upon request, LC or ST)
ports
Speed/Link/Ac LED
Green. There is one LED per port. It stays on when the link is
established correctly and flashes in the case of emission or
reception activity in the interface.
Duplex/Col. LED
Amber. There is one LED per port. It does not mean anything
for this type of interface, and it remains off.
LEDs associated with SFP (ports 9 and 10) ports
Speed/Link/Ac LED
Green. There is one LED per SFP interface. It stays on when
the link is established correctly and flashes in the case of
emission or reception activity in the interface.
LED Duplex/Col.
Amber. There is one LED per SFP interface. It stays on when
the transmission is Full-duplex and goes off when the
transmission is Half-duplex. It flashes in the case of collision.