manualshive.com logo in svg

ZIV SW3, User Manual, Page: 116 / 122

Share
Download
ZIV SW3 User Manual Download Page 116

SW3

 

GIGABIT/FAST ETHERNET SWITCH TYPE SW3 (DIN) 

116/122

 

USER GUIDE - M0SW3D1905Iv04 -   V04  May 2019 

      port[]/ 
         [port] priority use_ieee8021p use_dscp 
         -------------------------------------- 
         1      0        on            off      
         2      0        on            off      
         3      0        on            off      
         4      0        on            off      
         5      0        on            off      
         6      0        on            off      
         7      0        on            off      
         8      0        on            off      
         9      0        on            off      
         10     0        on            off      
   rate_control/ 
      ingress[]/ 
         [ingress] enable traffic rate  
         ------------------------------ 
         1         off    all     64000 
         2         off    all     64000 
         3         off    all     64000 
 
 
Press any key to continue or CTRL+C to stop. [A 
 [J         4         off    all     64000 
         5         off    all     64000 
         6         off    all     64000 
         7         off    all     64000 
         8         off    all     64000 
         9         off    all     64000 
         10        off    all     64000 
      egress[]/ 
         [egress] enable rate  
         --------------------- 
         1        off    64000 
         2        off    64000 
         3        off    64000 
         4        off    64000 
         5        off    64000 
         6        off    64000 
         7        off    64000 
         8        off    64000 
         9        off    64000 
         10       off    64000 
   monitor/ 
      ingress_enable    = off 
 
 
Press any key to continue or CTRL+C to stop. [A 
 [J      ingress_dest_port = 1   
      egress_enable     = off 
      egress_dest_port  = 1   
      port[]/ 
         [port] ingress egress 
         --------------------- 
         1      off     off    
         2      off     off    
         3      off     off    
         4      off     off    
         5      off     off    
         6      off     off    
         7      off     off    
         8      off     off    
         9      off     off    
         10     off     off    
   mac/ 
      age_time = 300 
   stp/ 
      enable        = on           
      version       = rstp         
      priority      = 32768        
 
 
Press any key to continue or CTRL+C to stop. [A 
 [J      max_age       = 20.000000000 
      hello_time    = 2.000000000  
      forward_delay = 15.000000000 
      tx_hold_count = 6            
      port[]/ 
         [port] enable priority cost   edge ptp  edge_tx_filter 
         ------------------------------------------------------ 
         1      on     128      200000 auto auto off            
         2      on     128      200000 auto auto off            
         3      on     128      200000 auto auto off            
         4      on     128      200000 auto auto off            
         5      on     128      200000 auto auto off            
         6      on     128      200000 auto auto off            
         7      on     128      200000 auto auto off            
         8      on     128      200000 auto auto off            
         9      on     128      20000  auto auto off            
         10     on     128      20000  auto auto off            
   lldp/ 
      enable = on 
      port[]/ 
         [port] admin_status transmit_interval hold_multiplier reinit_delay credit_max 
trans_interval_fast number_message_fast_tx notification_enable tx_portdesc tx_sysname tx_sysdesc 
tx_syscap tx_management management_address 
         -----------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------------------------------
------------------ 
 
 
Press any key to continue or CTRL+C to stop. [A 
 [J         1      TxRx         30                4               2            5          1                   
4                      off                 off         off        off        off       off           
0.0.0.0            
         2      TxRx         30                4               2            5          1                   
4                      off                 off         off        off        off       off           
0.0.0.0            
         3      TxRx         30                4               2            5          1                   
4                      off                 off         off        off        off       off           
0.0.0.0            
         4      TxRx         30                4               2            5          1                   
4                      off                 off         off        off        off       off           
0.0.0.0            
         5      TxRx         30                4               2            5          1                   
4                      off                 off         off        off        off       off           
0.0.0.0            

Summary of Contents for SW3



























































































































Reviews:

No comments