Control panel overview
This topic provides an introduction to the control panel user interface, LCD,
operator controls, and indicators.
The user interface
Figure 1: The control panel user interface (with fire routing and fire protection controls)
1. Supply
LED
2. General Test LED
3. General Disable LED
4. General Fault LED
5. Alarm
LED
6. LCD
7. Sounder Delay button and LED
8. Sounder Fault/Disabled/Test LED
9. Jog dial and function buttons
10. Reset button and LED
11. Panel Silence button and LED
12. Sounder Start/Stop Button and LED
13. System Fault LED
14. Low Battery LED
15. Earth Fault LED
16. Supply Fault LED
17. Fire Protection Fault/Disabled/Test LED
18. Fire Protection Delay button and LED
19. Fire Protection On/Acknowledged button
and LED
20. Fire Routing Fault/Disabled/Test LED
21. Fire Routing Delay button and LED
22. Fire Routing On/Acknowledged button and
LED
For a detailed overview of front panel controls and indicators, see “Front panel
controls and indicators” on page 4.
ZP2-F Series Fire Alarm Control Panel Operation Manual
3
