Figure 5: Changing the operator password
Performing an LED and buzzer test
Perform and LED and buzzer test to confirm that the LED indicators and control
panel buzzer are working correctly.
To perform an LED and buzzer test:
1. Select Tests from the Main menu.
2. Select UI tests, and then Indicators test.
During the test the control panel buzzer sounds and all LED indicators are
steady.
The test continues for two minutes. Press F2 (Exit) to exit the test before the
default timeout.
Performing a keyboard test
Perform a keyboard test to confirm that the buttons are working correctly.
To perform a keyboard test:
1. Select Tests from the Main menu.
2. Select UI tests, and then Keyboard test.
3. Press a button on the control panel interface.
A message appears on the LCD to confirm that the button has been pressed.
4. Repeat step 3 for all buttons.
5. Press F2 (Exit).
Performing an LCD test
Perform an LCD test to confirm that the LCD is working correctly.
To perform an LCD test:
1. Select Tests from the Main menu.
2. Select UI tests, and then LCD test.
A test pattern displays on the LCD to help identify the location of defective
pixels.
3. Press F2 (Exit).
ZP2-F Series Fire Alarm Control Panel Operation Manual
21
