7
www.zippity-outdoor.com
STEP 5: CONNECT THE PANELS
STEP 6: INSERT THE POST CAPS
STEP 5.1
STEP 6.1
1.
Take one of the two assembled side panels and place it at a right angle to the front panel as shown.
2.
Drive (4) 4” screws (K) into the pre-drilled holes in the top and bottom rail.
3.
Repeat this process on the other side with the third screen as shown below.
Insert (6) post caps (A) over the top of the posts to complete the screen.
NOTE: Ensure the screws are driven in straight.
1
3
2
K
Front Panel
A