background image

DISPOSAL AND RECYCLING INFORMATION

When this product reaches the end of its life, please take it to an approved 

collec-tion or recycling point designated by your local or state government.  

This wheelchair is manufactured using a variety of materials,  Your product 

should not be disposed of as ordinary household waste.  You should dispose of 

your wheelchair properly, according to local laws and regulations.  Most 

materials that are used in the construction of this product are fully recyclable.  

The separate collection and recycling of your product at the time of disposal 

will help conserve natural resources and ensure that it is disposed in a manner 

that protects the environment.

Ensure you are the legal owner of the product prior to arranging for the 

product disposal in accordance with the above recommendations.

I. INTRODUCTION

KID  KART  XPRESS

2

SUNRISE MEDICAL LISTENS

Thank you for choosing a Zippie wheelchair.  We want to hear your questions or

comments about this manual, the safety and reliability of your chair, and the service

you receive from your Sunrise supplier. Please feel free to write or call us at the

address and telephone number below:

Sunrise Medical (US) LLC

Customer Service Department

2842 Business Park Ave

Fresno, CA 93727

(800) 333-4000

Be sure to return your warranty card, and let us know if you change your address.

This will allow us to keep you up to date with information about safety, new products

and options to increase your use and enjoyment of this wheelchair. If you lose your

warranty card, call or write and we will gladly send you a new one.

FOR ANSWERS TO YOUR QUESTIONS

Your authorized supplier knows your wheelchair best, and can answer most of your

questions about chair safety, use and maintenance. For future reference, fill in the fol-

lowing:

Supplier:________________________________________________

Address:________________________________________________

 

_______________________________________________________

 

Telephone:______________________________________________

 

Serial #:

 

__________________

 

Date/Purchased:

 

_______________

ADDITIONAL INFORMATION YOU SHOULD KNOW

No component of this chair was made with natural latex rubber

9921700000 Rev. E

Summary of Contents for Kid Kart Xpress





























Reviews: