SAFETY
Z.I.P.P.E.R Maschinen Austria
www.Zipper-maschinen.at
Betontrennschneider / Concrete cutter ZI-BTS350
Seite 21
During refueling the fire, naked flame and smoking prohibited.
Refuel with the engine running or when engine parts are still hot, is strictly
prohibited.
Refuel only outdoors or in well-ventilated areas.
Wipe off spilled fuel immediately.
Fuel is highly flammable!
With fatigue, lack of concentration or under the influence of medicines, alcohol
or drugs that work on the machine is prohibited!
Before each use, check machine in perfect condition! Oil level, blade condition,
tightness screws etc ...
The regular maintenance and inspection is safety critical.
Always insure that the machine has a secure, stable stand! Allow extra care in
the wet, snow, ice and work on uneven surfaces and above Work surfaces with
a slope!
Slipping / tripping / falling is a major cause of serious injury or death. Watch
out for uneven or slippery work surfaces.
Never stand on the machine, especially not when it is in operation.
The machine may only be operated by qualified personnel enrolled. Unautho-
rized persons, especially children, and people are not trained to keep away
from the machine! Operation of the machine just over 18 years.
If you work on the machine, you do not wear loose jewelry, loose
clothing, ties, long, loose hair, etc ...
Loose objects can become entangled in moving parts of the machine
and cause injury!
When working on the machine zertifizerte appropriate protective equipment
(gloves, work shoes with steel inserts, safety glasses, hearing protection, ...)
wear!
Engine emissions contain toxic gases, which have a negative impact on per-
sonal health. Therefore, they work with the machine in a well ventilated area
or outdoors!
NEVER touch the carburetor, spark plug, air filter. Motor unit during and im-
mediately after the operation! Risk of burns!
Allow the engine to cool before adding fuel perform maintenance etc. ...
The running machine should never be left unattended! Turn off the machine
before leaving the work area and wait until the engine is at a standstill!
