ZIPPER MASCHINEN ZI-MOS145A, User Manual

Page: 25 / 43

ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at 25
ZI-MOS145A / ZI-MOS4TA
•
Refuel only outdoors or in a well ventilated area.
•
Avoid contact with skin and clothes (fire hazard).
•
Check after refuelling tank cap and check for leaks.
•
Start the engine at least 3 meters from the tank location.
•
Spilled fuel is wipe immediately.
•
Work attentively, safety conscious and always be fully aware safe stand when working! Caution
on uneven work surfaces and work surfaces with a slope!
•
Never cutting:
- above hip height
- on a ladder
- on trees
•
Regular breaks reduce the security risk to loss of control due to fatigue. Change the working
position over again.
•
Avoid abnormal posture.
•
At idle, the blade should not rotate!
•
The maximum shaft speed must not exceed the specified speed. Checked settings!
•
No other person shall remain within 15m!
•
This distance also adhere to things! Danger of damage!
•
Solid objects, stones, metal parts, or the like can be thrown out - risk of injury!
•
Use personal safety equipment: ear protectors, safety goggles, safety shoes and safety helmet
when working with the machine
•
Never leave the machine running unattended! Before leaving the working area switch the
machine off and wait until the machine stops.
•
Switch off the machine before maintenance or adjustment.
•
Storage always with an empty tank in a safe place.
•
Do not grab in the cutting tool while it is rotating.
•
Take care that you do not get under the cutting tool!
•
Always use the correct cutting tool for the work to be done.
•
Do not operate in an enclosed or confined areas.
•
Exhaust contains poisonous carbon monoxide. The exposure can cause unconsciousness and
death.
•
Before the start, after the failure or shock, be sure to check the device and make sure that it is
in good condition.
•
Wear firm gloves when you use the brush cutter or if you install or remove the cutting blade.
TRANSPORT NOTES:
•
Switch off the engine
•
Fit the blade guard
•
Secure the machine
•
Empty tank completely, avoid fuel spillage
•
To avoid damage to the device never drag but always lift correctly.
STORAGE NOTES:
•
Remove and clean thread head and cutter blade
•
Fit the blade guard
•
Clean the machine and dry
•
Empty Tank completely, avoid fuel spillage
•
Store in a dry, out of reach of children place, well packaged (protection against cuts)